Masterarbeiten
Hier gibt es aktuelle Angebote für Masterarbeiten.
Water electrolysis is a key technology for enabling a sustainable human presence on the
Moon, where locally available water resources can be used to produce oxygen and
hydrogen. However, lunar water is expected to contain impurities such as sulphur
species and dissolved salts, which pose significant challenges for electrochemical
systems and can lead to rapid degradation.
This thesis focuses on preliminary measurements of AEM electrolysis under simulated
operating conditions, with particular emphasis on lunar water analogues. The goal is to
better understand how impurities affect performance and lifetime, and to develop more
robust electrodes for lunar base environments.
Work packages include:
• AEM electrode fabrication
• Electrochemical lifetime testing
• Analysis of degradation mechanisms
• Data evaluation and feedback
At the Fuel Cell & Hydrogen research group at CEET, you will join a team of
experienced researchers, PhD candidates, and motivated master’s students with strong
expertise in materials preparation, electrochemistry, and cell characterization. The
institute provides a fully equipped electrochemical laboratory with all necessary
infrastructure for the planned experimental work. Furthermore, this work will be
conducted in close collaboration with the company Duramea FlexCo.
DI Dr. Sebastian Rohde, Prof. Viktor Hacker, Inffeldgasse 25C, Tel: 0316 873 8798, E-mail: sebastian.rohde@tugraz.at
Background: Concrete corrosion poses a significant problem for numerous public infrastructure, including road and railway bridges. This phenomenon can potentially result in structural damage to the buildings concerned and consequential catastrophic outcomes. A recent example of this phenomenon is the 2024 collapse of the tram bridge at the Carola-bridge in Dresden. Investigations revealed that the primary cause of this disaster was the ingress of chloride ions into the steelreinforced concrete, in conjunction with the process of carbonation. The ingress of chlorides into concrete structures initiate an irreversible corrosion process of the steel reinforcement. To mitigate the risk of such incidents, routine inspections of public buildings are conducted using a combination of chemical and physical methods. Conventional titration, following digestion with nitric acid, is the standard method for determination of chloride in concrete samples. Consequently, samples are collected on-site and transfered to the designated laboratory for analysis.
Objective: The main goal of this project is to conduct a field test for chloride in drill dust samples. The rapid test is based on a lab-on-paper or lab-on-chip approach, which integrates sample preparation (filtering and neutralisation), reaction and detection units. This approach will enable a rapid determination of chloride contamination in the field.
Tasks: - Synthesis of fluorescent indicators - Immobilisation dyes in polymer or paper matrix - Preparation of lab-on-chips with added manufacturing (3D-printing) – Integration of sample preparation - Development of analytic procedure – Testing with real sample – Validation with standard titration method
Requirements: Bachelor’s in Chemistry, Biomedical Engineering, Geo Sciences, Environmental Systems Sciences
Start of the work: As soon as possible
Duration of practical work: 6 months
Contact: Assoc. Prof. Torsten Mayr; email: torsten.mayr@tugraz.at
Master's Thesis Topic:
The global trend toward non-alcoholic beers is unstoppable – quality and taste are constantly improving. As part of this master’s thesis, sensors will be integrated into the world's leading beer analysis system to enable precise measurements supporting quality control. The goal is to explore new measurement methods and evaluate their potential for characterizing non-alcoholic beers.
Requirements:
- Ongoing studies in one of the following fields: Mechanical Engineering, Process Engineering, Physics, Electrical Engineering, Mechatronics
- Analytical and solution-oriented approach, as well as independent and proactive working style
- Team spirit and willingness to collaborate in a dynamic environment
We offer you:
The employment is based on a work contract. Successfully completing the master’s thesis will be rewarded with a one-time fee of €3.000.
Have we sparked your interest? We look forward to your application! If you have any questions or need further information, feel free to contact us.
Dr. Wolfgang Baumgartner
Business Area Manager
Wolfgang.baumgartner[at]anton-paar.com
Dr. Werner Schlemmer
Product Manager
Werner.schlemmer[at]anton-paar.com
The aim of this research is to experimentally investigate the effect of moisture on the stretch behavior and structural integrity of Kraft paper. Exposure to moisture can significantly alter the mechanical performance of paper by disrupting the inter- fiber hydrogen bonding within its fibrous network. This study seeks to elucidate the underlying mechanisms governing moisture- induced changes in paper's stretch characteristics and structural cohesion through comprehensive experimental analyses.
Specifically, the objectives are as follows:
1. Characterize the stretch behavior of paper under varying moisture conditions using mechanical testing methods to establish quantitative relationships between moisture content and mechanical properties.
2. Propose strategies to enhance the moisture resistance of Kraft paper products based on insights gained from the experimental analyses.
Through this study, the student will gain invaluable expertise in various aspects of papermaking, testing methodologies, fundamental research, and design of experiments. The findings will contribute to a comprehensive understanding of how moisture interacts with the fibrous structure of Kraft paper, leading to alterations in its stretch behavior and structural integrity. This knowledge can guide the development of moisture-resistant paper products, optimize manufacturing processes, and extend the service life of paper.
Start date: as soon as possible (Graz, Frantschach)
Place of work: Please contact Ruya Ozer (ruya.ozer@mondigroup.com)
Salary: yes, 6 month contract
We at Mondi follow the strategy “First Time Right” which means we can not make compromises with regards to pulp quality. Since wood is a natural material with lots of variabilities, we aim to understand the variation and effect of single fiber lignin content.
One bachelor thesis shall be dedicated to replicate and optimize a lab method to test single fiber lignin content. The pulps will be characterized with a microscope and a python script can be employed to create data sets. It will be your task to characterize different pulps or mixtures thereof with the new technique and use statistics to derive meaningful conclusions for pulp quality homogeneity.
One bachelor thesis shall be dedicated to understand the effect of wide kappa number distributions on the pulp and paper quality. It will be your task to mix pulps in different ratios and then refine pulps in the lab PFI mill to test paper quality such as but not limited to tensile strength, air resistance, density.
Start date: any time Q2 2025 and Q4 2025 (if this does not suit, talk to Johannes)
Place of work: Graz University of Technology or Tulln an der Donau; initiated by Johannes Leitner (Johannes.leitner@mondigroup.com)
The industry follows the rule “First Time Right” which means we can not make compromises with regards to pulp quality of lignocellulosic fibers for sustainable packaging paper. Since wood is a natural material with lots of variabilities, we aim to understand the variation and effect of single fiber lignin content.
The master thesis shall be dedicated to replicate and optimize a lab method to test single fiber lignin content. The pulps will be characterized with a microscope and a python script can be employed to create data sets. It will be your task to characterize different pulps or mixtures thereof with the new technique and use statistics to derive meaningful conclusions for pulp quality homogeneity.
Furthermore the thesis shall be dedicated to understand the effect of wide kappa number distributions (lignin content) on the pulp and paper quality. It will be your task to mix pulps in different ratios, apply the developed single fiber kappa method and then refine pulps in the lab PFI mill to test paper quality such as but not limited to tensile strength, air resistance, density.
If you are a female student, please feel welcome to join a team of highly motivated team of engineers and scientists. Please contact Johannes.leitner@mondigroup.com until 28th of February 2025.
Thema: Sustainable paper solutions to replace plastic
Mondi offers a wide range of paper grades which are used to replace plastic when possible. The most challing environment is for Advantage Kraft Mulch used to help farmers to reduce plastic waste and eliminate the use of pesticides. While Mondi wants to extend the use of paper in this industry, we need to push the limits. We look for female students who are skilled in the art of chemistry and process engineering required to do their mandatory praxis internship at FH’s in Austria. Your have the chance to support us and use/develop a new technique to make starch based glue more sistant against water, moisture and microbiological attac by fungis and bacteria. You will work at the laboratories in Ulmerfeld-Hausmening with a well experienced team which will guide and support you.
Specifically, the objectives are as follows:
1. Use existing methods to improve the resistance of starch based glues
2. Adapt or develop new techniques if needed
Start date: September 2025 or February 2026;
in case you are interested and a female student, please come back to Martin Spitzbart (Martin.Spitzbart@mondigroup.com ) by 28th of February 2025
Thema: INVESTIGATING THE FEASIBILITY OF RECYCLING ACTIVE PHARMACEUTICAL INGREDIENTS (API)
Typ: Masterarbeit
This thesis aims at assessing the needed framework towards recycling of APIs and consists of:
- Analysis of the regulatory and legal framework for API recyling including the regulatory landscape of Austria (set by the AGES) and the EU (set by the EMA)
- Analysis and estimation of occurring APIs in waste streams, including the expected type and amount of materials together with industrial partners from our network
- Classification of these APIs according to their value, social importance as well as physicochemical properties to establish a recycling strategy
- Definition of target APIs with high potential to be successfully recycled and proposition of suitable process routes together with pharmeceutical engineering experts at RPCE
Ausgeschrieben seit: Februar 2025
Nähere Infos: hier
Masterarbeit am IBioSys
Thema: Optimization of the Nano Cellulose production using homogenisation
Typ: Bachelorarbeit
The use of environmentally friendly, renewable, and sustainable biomaterials is becoming increasingly important. This area of research has attracted the interest of academy and industry because such materials are one solution to resource depletion, environmental pollution, global warming, and the energy crisis. Moreover, biopolymers are essential in biomedicine and nutrition. In this context, so called nanocelluloses and other nano bio polymers (chitin/chitosan, polyesters) are considered promising. Those are isolated as nano-particles, very thin fibres, or crystals from ubiquitous renewable biopolymer sources; example cellulosic sources (e.g., wood, algae, bacteria (also polyesters), tunicates).
In this Bachelor Thesis:
- different pre-treatment processes (chemical, enzymatic)
- different conditions parameter using Homogenisation technique (time, pressure, concentration…)
will be studied in order to optimize the production process of the tuned NFC and NCC, which will be produced first time at IBioSys labs using new Homogenizator installed in our labs recently.
Kontakt: Prof. Karin Stana Kleinschek
Ausgeschrieben seit: Jänner 2024
Nähere Infos: hier
Masterarbeit am FELMI
Thema: Design von kunststoffbasierten Hochleistungsmaterialien mittels korrelativer Mikroskopie / Spektroskopie
Typ: Masterarbeit
Im Zuge der geplanten Masterarbeit soll das bislang wissenschaftlich fundierte Verständnis zwischen Chemie, Struktur, innerer Morphologie und Funktionalität erweitert und spezialisiert werden. Der Fokus der stark experimentellen Arbeit liegt deshalb auf der vollständigen Charakterisierung der Materialien mittels AFM (Atomic Force Microscopy) und QNM (Quantitative Nanomechanical Mapping). Ziel ist es, die angewandten Methoden und die daraus resultierende korrelative Dateninterpretation zu anderen mikroskopischen Methoden (SEM, TEM) zu vertiefen. In Kooperation mit dem Firmenpartner soll dadurch der Brückenschlag zwischen den makroskopischen Eigenschaften und deren mikro-/nanoskopischer Ursachen ermöglicht werden.
Kontakt: Dean Vidakovic, MSc
Ausgeschrieben seit: Jänner 2024
Nähere Infos: hier
Masterarbeit am FELMI
Thema: OF2i-A novel approach to Nanoparticle detection for the study of Intraocular-lenses
Typ: Masterarbeit
This thesis is embedded in the interdisciplinary NanoVISION project and applies a novel particle detection method (OF2i) to analyze the particle emission of intraocular lenses (IOLs). IOLs are used during cataract surgery and understanding their particle emission might be a crucial step to further reduce post operation complications. To this end a comprehensive study of common IOL types particle emission is done in this master thesis using a standard filtration and scanning electron microscopy (SEM) approach as well as the new OF2i-technique. At the end of the thesis two questions should be answered: Are there differences in the particle emission of different IOL-types? How does the novel OF2i-techinque compare to standard methods?
Kontakt: Dr. Harald Fitzek
Ausgeschrieben seit: Jänner 2024
Nähere Infos: hier
Masterarbeit am FELMI
Thema: Design von kunststoffbasierten Hochleistungsmaterialien mittels korrelativer Mikroskopie / Spektroskopie
Typ: Masterarbeit
Im Zuge der geplanten Masterarbeit soll das bislang wissenschaftlich fundierte Verständnis zwischen Chemie, Struktur, innerer Morphologie und Funktionalität erweitert und spezialisiert werden. Der Fokus der Arbeit liegt auf der korrelativen Charakterisierung mittels mikroskopischer (SEM, TEM, AFM) und spektroskopischer Methoden (FT-IR, Raman). In Kooperation mit dem Firmenpartner soll dadurch der Brückenschlag zwischen den makroskopischen Eigenschaften und deren mikro-/nanoskopischer Ursachen ermöglicht werden.
Kontakt: Dean Vidakovic, MSc
Ausgeschrieben seit: November 2023
Nähere Infos: hier
Masterarbeit am Institut für Chemie und Technologie Biobasierter Systeme
Thema: Development of biopolymer-based 3D structures from natural materials and enzymatic crosslinking
Typ: Masterarbeit
In this thesis, you will focus on the chemical modification of biopolymers, the development of inks and the fabrication of dimensionally stable 3D scaffolds from chemically modified natural polysaccharides such as nanocellulose and alginate. These two polymers will be integrated into the development of the inks, which will ultimately be transformed into 3D printed structures followed by enzymatic crosslinking. The optimised and selected inks and scaffolds will be characterised regarding their rheology, physicochemical and mechanical properties as well as their biological properties.
Beginn: Sofort
Kontakt: Prof. Dr. Karin Stana Kleinschek
Ausgeschrieben seit: November 2023
Nähere Infos: hier
Masterarbeit am Institute of Chemical Engineering and Environmental Technology
Thema: Design of natural deep eutectic solvents for application in absorption heat pumps
Typ: Masterarbeit
This work is about the design of natural deep eutectic solvents (DES) for the application in absorption heat pumps. Absorption heat pumps commonly use water and lithium bromide as working media; lithium bromide acts as absorbent. As lithium bromide reduces the performance of absorption heat pumps at higher temperatures, DES shall be investigated as alternative absorbents. DES are mixtures of two compounds which interact with each other (e.g. through hydrogen bonding) and lead to a melting point depression. When compared to LiBr, DES have several advantages, such as simple and cheap production, and they can be produced from renewable raw materials. This master thesis includes the design and production of DES and their characterization.
Beginn: November 2023
Anstellung: 8 h/Woche
Kontakt: Dipl.-Ing. Paul Demmelmayer
Ausgeschrieben seit: November 2023
Nähere Infos: hier
Master thesis in an interdisciplinary project on biomolecular condensates
Typ: Masterarbeit
The project is anchored at the interface of structural biology, cell biology, and functional molecular sciences to explore novel molecular mechanisms that regulate the activity of transcription factors in plants.
The state-of-the-art techniques, including heterologous protein expression, NMR spectroscopy, protein binding studies, liquid-liquid phase separation assays, and super-resolution microscopy, will be employed to decipher the structure and function of intrinsically disordered proteins unique to the eukaryotic kingdom.
Beginn: Sofort
Ausgeschrieben seit: Oktober 2023
Nähere Infos: hier
Studentischer Mitarbeiter - Bachelor-/Masterarbeit am PCCL
Typ: Studentischer Mitarbeiter - Bachelor-/Masterarbeit am PCCL
- Literature review on thermo-responsive additives and functional groups
- Synthesis and characterization of thermo-responsive additives and functional groups
- Development of thermo-responsive functional polymer coatings
- Thermomechanical testing and characterization of the developed functional coatings
- Interpretation of data
- Preparation of presentations for project partners and participation in project meetings
Anstellung: 20 h/Woche
Beginn: 01.08.2023
Ausgeschrieben seit: Juli 2023
Nähere Infos: hier
Masterarbeit am FELMI und ICTM
Typ: Masterarbeit am FELMI und ICTM (TU Graz)
Im Zuge des Projektes MicroPIC (Microscopy For Plastics In Cereals) erforscht das Zentrum für Elektronenmikroskopie Graz (ZFE) die Aufnahme von Mikro- bzw. Nanoplastik (MNP) in Getreidepflanzen. Ziel des Projektes ist es Methoden zum Nachweis dieser Partikel durch bildgebende, korrelative Mikroskopie und Spektroskopie zu entwickeln. Damit sollen konkrete Aussagen über Auswirkungen von Kunststoffteilchen im (Acker-) Boden auf Pflanzen und deren Weiterverarbeitung für die Mehlherstellung gewonnen werden.
Beginn: Sofort
Kontakt: DI Dr. Johannes Rattenberger
Ausgeschrieben seit: Juli 2023
Nähere Infos: hier
Masterarbeit am ICTM
Typ: Masterarbeit am ICTM (TU Graz)
Thema: Synthesis of luminescent organic radicals for OLEDs
Open-shell organic radicals are attractive in material science and various areas due to their fundamental structures and unique physicochemical properties. However, the intrinsic instability arising from their incompletely satisfied valency hinders further development. In these decades, in-depth studies on structure-stability relationships proved the possibility to prepare persistent and even stable organic radicals, which have been successfully applied in various functional devices.
Beginn: Sofort
Kontakt: Gregor Trimmel
Ausgeschrieben seit: Juli 2023
Nähere Infos: hier
Bachelorarbeit an der TU Graz (Anorganische Chemie)
Typ: Bachelorarbeit an der TU Graz, Institut für Anorganische Chemie
Thema: Untersuchung mehrkerniger Seltenerd-/Übergangsmetallkomplexe zur kooperativen Katalyse
Wir entwickeln und untersuchen mehrkernige Komplexe zur Anwendung in der kooperativen Katalyse. Der Fokus liegt hierbei auf der Verwendung von Seltenerdmetallen bzw. deren Kombination mit späten Übergangsmetallen, um herausfordernde Umsetzungen zu erleichtern. Unser Ziel ist es Know-how für die nachhaltige und ressourcenschonende Produktion von Basischemikalien zu schaffen. Entsprechend befassen wir uns vorrangig mit katalytischer Hydroaminierung, der nebenproduktfreien Addition von Aminen an Olefine bzw. Alkine, sowie der reduktiven Kupplung von Kohlenoxiden, einem Schlüsselschritt in der Umwandlung von Kohlendioxid zu Kohlenwasserstoffen.
Beginn: Sofort
Kontakt: Dr. Johann Hlina
Ausgeschrieben seit: Juli 2023
Nähere Infos: hier
Masterarbeit am RCPE
Typ: Masterarbeit am RCPE
Thema: Development of Control Concepts for a Continuous Pharmaceutical Manufacturing Line
The ConsiGmaTM-25 is an industry-scale from-powder-to-tablet pharmaceutical manufacturing line. The line integrates the following unit operations: twin screw granulation (to produce wet granules), drying (to dry the wet granules), granule-conditioning (to break the large granules and add powders needed for tableting), and tablet press (to produce tablets). The innovative sensors monitoring critical quality attributes (CQA) have been installed and the artificial intelligence (AI) and machine learning (ML) process models linking the process settings and CQAs have been developed. The objective of this thesis is to integrate the process models that are currently available to design a model predictive controller (MPC).
Kontakt: Sandra Sünkel
Ausgeschrieben seit: April 2023
Nähere Infos: hier
Masterarbeit bei Lenzing
Typ: Masterarbeit bei Lenzing
Thema: Untersuchung zur Bildung und Vermeidung von Ca-Ablagerungen
Über den Faser-Rohstoff Zellstoff und eine spezielle Abwasser - Rückgewinnungsanlage werden Kalzium-Komponenten in das Spinnbad des Viskoseprozesses eingebracht. Abhängig von der zugeführten Menge, den Prozessbedingungen im Spinnbad - Kreislauf und dem Abstoß bilden sich Gleichgewichtskonzentrationen, die im weiterführenden Kristallisationsprozess der Modalfaser - Herstellung zu ungewollten Verschmutzungen und Ablagerungen führen. Diese Ausfällungen führen nicht nur zu hohen Reinigungsaufwänden oder Verlust von Anlagenverfügbarkeit, sie unterbinden teilweise auch den Betrieb der speziellen Rückgewinnungsanlage und der damit verbundenen Kreislaufschließung!
Kontakt: Marlene Kienberger
Ausgeschrieben seit: März 2023
Nähere Infos: hier
Masterarbeit am RCPE
Typ: Masterarbeit am RCPE
Thema: OPTIMIZATION OF A CONTINUOUS MANUFACTURING LINE FOR POTENT APIS
Among experts, the continuous manufacturing of APIs (Active Pharmaceutical Ingredients) is considered the next big leap in the pharmaceutical industry. Therefore, implementing an automated, continuous manufacturing line is one of the most exciting and challenging chemical engineering endeavors. A flawlessly-working, transition-free setup can be achieved by optimizing each unit operation regarding its subsequentially installed counterparts.
Kontakt: Sandra Sünkel
Ausgeschrieben seit: April 2023
Nähere Infos: hier
PureSurf - Masterarbeit an der Universität Graz
Typ: Masterarbeit an der Universität Graz
Thema: PureSurf
- Green chemistry & Circular economy
- Investigation of environmentally benign, (catalytic) transformations
- Optimization and scale-up of already developed synthetic routes
- Investigation of alternative starting materials and/or reactions
- Characterization of intermediate-, and product streams
Beginn: Sofort
Kontakt: Dr. Markus Hochegger
Ausgeschrieben seit: März 2023
Nähere Infos: hier
Masterarbeit am ACFC (TU Graz)
Typ: Masterarbeit am ACFC (TU Graz)
Thema: Synthesis and characterization of fluoroionophores for optical sensing of K+ and Na+
The main goal will be the synthesis and characterisation of K+ and Na+ fluoroionophores combining attractive spectral properties, high selectivity and sensitivity to the ion of interest. In this thesis, you will become familiar with experimental techniques used for the synthesis and characterization of dyes, receptors and fluoroionophores. You will also gain knowledge of luminescent materials and their characterization.
Kontakt: Assoc. Prof. Sergey Borisov
Ausgeschrieben seit: Jänner 2023
Nähere Infos: hier
Masterarbeit am ACFC (TU Graz)
Typ: Masterarbeit am ACFC (TU Graz)
Thema: Synthesis and characterization of molecular thermometers showing (sub)microsecond TADF-emission
The main goal will be the synthesis and characterisation of bright TADF-emitting dyes with short emission lifetimes (several μs and ideally 1 μs) that will enable lifetime-based temperature imaging with negligible oxygen cross-talk and using widespread imaging equipment. In this thesis, you will become familiar with experimental techniques used for the synthesis and characterization of TADF-emitting organic dyes. You will also gain knowledge of luminescent materials and their characterization.
Kontakt: Assoc. Prof. Sergey Borisov
Ausgeschrieben seit: Jänner 2023
Nähere Infos: hier
Masterarbeit: Rückgewinnung von Ammoniak aus Kläranlagen
Typ: Masterarbeit am AEE - Institut für Nachhaltige Technologien
Thema: Rückgewinnung von Ammoniak aus Kläranlagen
Ziel der Masterarbeit ist es experimentell im Labormaßstab zu untersuchen ob mithilfe eines neuen innovativem, kombinierten Verfahrensansatz bestehende Limitierungen der Vakuummembrandestillation (VMD) verbessert werden können für die Ammonium Rückgewinnung. Dieser innovative Ansatz verbindet eine Vorbehandlung mittels Zeolith-basierten Ionenaustausch und nachfolgender Vakuummembrandestillation (VMD). Wobei ein neuer Regenerationskreislauf für das Ionenaustausch Loop Stripping-Verfahren bei hohen Ammoniakkonzentrationen von Projektpartnern an der Montanuniversität Leoben (MUL) entwickelt wird und mit einer neuartigen VMD-Testzelle mit optimierter Membran gekoppelt wird (AEE INTEC).
Ausgeschrieben seit: November 2022
Nähere Infos: hier
Masterarbeit am ICTM
Typ: Masterarbeit
Thema: Additive manufacturing of lead-free piezoceramics
The main goal will be the design of a photoactive suspensions and preparation of piezoceramics by photopolymerization using UV light and sintering. Within this thesis, you will get familiar with experimental techniques used for the synthesis and characterization of powders, suspensions, and sintered materials, as well as the photopolymerization principles. Moreover, you will get knowledge on electroceramic materials and skills in microscopy, X-ray diffraction, and electrical measurements of piezoceramics.
Kontakt: Assist. Prof. Dr. Jurij Koruza
Ausgeschrieben seit: November 2022
Nähere Infos: hier
Masterarbeit am Institut für Anorganische Chemie der Uni Graz
Typ: Masterarbeit
Thema: Synthesis of a new catalyst for the reduction of CO2 at ambient conditions
The goal will be the synthesis of a new type of alkaline earth metal hydride complex stabilised by a new chonky diazadiene (DAD) ligand. This [DAD]AeH complex will then be used to catalytically reduce CO2 with various reducing agents. You will be part of the whole catalyst design and fabrication process, from the ligand synthesis to the activity testing of the finished catalyst.
Kontakt: Dado Rodic
Ausgeschrieben seit: Oktober 2022
Nähere Infos: hier
Diverse Stellen am Institute of Chemical Engineering and Environmental Technology CEET
Typ: Konstruktionsübung-Bachelorarbeit-Masterarbeit
Thema: Lösungsmittelaufnahme von hochvernetzten Polymerharzen.
ModKap intends to change the design of polymer encapsulated electronics. The goal is the model based choice of an appropriate polymer in a solvent environment, as e.g. in medical or automotive applications. The method is developed on the basis of the PCSAFT model to predict the solvent absorption in polymer-solvent pairs. In the case of a successful project, not only the design of polymer encapsulated polymers could be simplified, but the model could also be applied in polymer recycling or to model drug delivery systems for pharmaceuticals.
Kontakt: Stefan Wagner
Ausgeschrieben seit: Oktober 2022
Nähere Infos: hier
Bachelorarbeit am Institut für Physikalische und Theoretische Chemie der TU Graz
Typ: Bachelorarbeit am Institut für Physikalische und Theoretische Chemie der TU Graz
Thema: Photochemische Herstellung von metallischen Nanopartikeln und Stabilisierung in Polymer-Matrizen
Ziel der Bachelor-Arbeit ist die Herstellung von metallischen Nanopartikeln, insbesondere von Palladium, Platin, Ruthenium und Rhodium Nanopartikeln und deren Stabilisierung in einer schützenden Polymermatrix.
Kontakt: Dr. Max Schmallegger
Beginn: Sofort
Ausgeschrieben seit: September 2022
Nähere Infos: hier
Masterarbeit am Institute of Bioproducts and Paper Technology
Typ: Masterarbeit am Institute of Bioproducts and Paper Technology
Thema: Ionic Liquids in Energy Storage
In this collaborative project with Proionic GmbH, we aim at exploring ionic liquids as active compounds in energy storage devices. The challenge in this project is to alter the chemical properties of ionic liquids for specific applications in batteries.
Kontakt: Lukas Pachernegg
Ausgeschrieben seit: Juli 2022
Nähere Infos: hier
Masterarbeit am Institut für Prozess und Partikeltechnik
Typ: Masterarbeit am Institut für Prozess und Partikeltechnik
Thema: Design of a multistep (photo)biocatalytic process for the production of biopolymers
In this project, continuous flow reactors for whole-cell photobiocatalysis will be investigated and implemented in a multistep process. The stability and activity of photoautotrophic cells as biocatalysts will be optimized by testing different process parameters. The setup will be further expanded to develop a multistep cascade for the production of highly valuable compounds, such a biopolymers, which are relevant to the pharmaceutical industry.
Kontakt: Dipl. Ing. Dott.ssa Alessia Valotta
Beginn: Sofort
Ausgeschrieben seit: Mai 2022
Nähere Infos: hier
Masterarbeit am Institut für Physikalische und Theoretische Chemie
Typ: Masterarbeit am Institut für Physikalische und Theoretische Chemie
Thema: Multidimensional Printig (2D-4D) Of Advanced Materials
At the Institute of Physical and Theoretical Chemistry we are working on developing an “optical nose” for monitoring air quality by using a novel Digital-Light Processing (DLP) printing-based approach. The goal of the project is to create a multisensing device that incorporates advanced sensing MOF materials and that can be easily integrated in a phone using a novel DLP-based printing approach. You will learn and contribute to the synthesis, characterization and postsynthetic modification of ultraporous MetalOrganic Frameworks, 3D printing, and sensing of air pollutants.
Kontakt: Dr. Ing. Carlos Carbonell
Beginn: Sofort
Ausgeschrieben seit: Mai 2022
Nähere Infos: hier
Masterarbeit am Institute of Physical and Theoretical Chemistry
Typ: Bezahlte Masterarbeit am PTC
Thema: Metal-organic frameworks biocomposites for SARS-CoV-2 detection
The aim of this thesis is the preparation of Metal-organic frameworks (MOFs) biocomposites and their integration into vibrational spectroscopy based bio-agents detectors. The candidate will work in a multidisciplinary team composed of material scientists, physicists, chemists and biologists.
Kontakt: Prof. Paolo Falcaro
Beginn: Sofort
Ausgeschrieben seit: Mai 2022
Nähere Infos: hier
Masterarbeiten RCPE
Typ: Masterarbeiten am RCPE
Am RCPE (Research Center Pharmaceutical Engineering) ist eine Vielzahl an Masterbeiten ausgeschrieben.
Nähere Infos: hier
Masterarbeit bei Silicon Austria Labs
Typ: Masterarbeit in Villach bei Silicon Austria Labs
Thema: Towards a biosensor for algal toxins: sensing cyclic peptides on laser-induced graphene using molecularly imprinted polymers
The aim of the MSc project is to develop and test a functional sensing layer based on nano-MIPs using novel materials and biomimetic chemistry. You will work in a multidisciplinary team composed of electronic engineers, physicists, and chemists. You will select and test techniques to create molecularly imprinted polymers for cyclic peptides and immobilize them on novel, laser-induced graphene electrodes. The binding of the analytes will be detected electronically.
Ausgeschrieben seit: März 2022
Nähere Infos: hier
Bezahlte Masterarbeit am CEET
Typ: Bezahlte Masterarbeit am CEET
Thema: Determination of fluoride in Polymer Electrolyte Membrane Fuel Cell (PEMFC) effluent water
The aim of this thesis is the measurement of fluoride in PEMFC effluent water, using ion chromatography and optical spectroscopy, to help quantify degradation mechanisms.
Kontakt: Dipl.-Ing. Mathias Heidinger
Beginn: Sofort
Ausgeschrieben seit: Februar 2022
Nähere Infos: hier
Masterarbeit am IBioSys
Typ: Masterarbeit am IBioSys
Thema: Surface synthesis of glycosylated peptides on solid substrates
The aim of this work is the on-surface synthesis of short peptides containing saccharide residues in their side chains. These surface bound peptides are expected to elicit a specific biological response.
Kontakt: Assist. Prof. Rupert Kargl
Beginn: Sofort
Ausgeschrieben seit: Februar 2022
Nähere Infos: hier
Masterarbeit am ICTM
Typ: Masterarbeit am ICTM
Thema: Fabrication of robust fuel cells for a lunar outpost
Electrospinning, which is a method to produce fibres in the nanometre regime, has recently been used to manufacture robust and high-performance fuel cell electrodes. The aim of this thesis is to build upon these advances and fabricate as well as characterize electrospun nanofiber fuel cell electrodes.
Kontakt: Sebastian Rohde
Beginn: Sofort
Ausgeschrieben seit: Februar 2022
Nähere Infos: hier
Masterarbeit am ICTM/PCCL
Typ: Masterarbeit am ICTM/PCCL
Thema: Elastomer-Thermoplastic-Blends and Foam-Rubber Blends with Shape-Memory-Behavior
Im Zuge der Arbeiten sollen neue Thermoplast-Elastomer-Mischungen hergestellt und optimiert werden, die Shape-Memory-Verhalten zeigen. Dieser Effekt soll sowohl in kompakten Materialien, als auch geschäumte Materialien untersucht werden. Die Arbeiten umfassen die Herstellung der Polymermischungen, die Vulkanisation der Mischungen sowie die Charakterisierung der mechanischen Eigenschaften und des ShapeMemory-Effektes.
Ausgeschrieben von: Univ-Prof. DI Dr. Gregor Trimmel
Ausgeschrieben seit: Dezember 2021
Nähere Infos: hier
Praktikum/Masterarbeit am Jülich Forschungszentrum (Deutschland)
Typ: Praktikum/Masterarbeit am Jülich Forschungszentrum (Deutschland)
Thema: Untersuchung der Elektroden und des Einflusses der Betriebsparameter auf die Performance einer Durchflusszelle für die Elektrochemische Reduktion von CO2
Im Kampf gegen die globale Erwärmung und den Klimawandel ist die elektrochemische Reduktion von CO2 ein attraktiver Ansatz für die nachhaltige Produktion von Basischemikalien wie Kohlenmonoxid, Ameisensäure, und Ethanol. Insbesondere Ameisensäure ist ein interessantes Produkt der elektrochemischen Reduktion von CO2, da es zahlreiche Verwendung in der Chemischen Industrie findet und man es vergleichsweise leicht elektrochemisch herstellen kann. In diesem Rahmen suchen wir Sie für die Untersuchung von Kathodenmaterialien und der Einflussparameter auf die Performance einer Durchflusszelle. Ihre Aufgaben im Detail:
- Herstellung verschiedener Katalysatorschichten auf Gasdiffusionselektroden mit verschiedenen Methoden (Airbrush, Rakelbeschichtung, etc.)
- Anschließende physikalische (XRD, SEM/EDX), analytische (GC/MS, IC) und elektrochemische Untersuchung der hergestellten Elektroden hinsichtlich der Effizienz der Produktbildung
- Parameterstudie der Durchflusszelle (Variation der Durchflussmenge an Gas und Elektrolyt, etc.)
Dauer: 6 Monate
Ausgeschrieben seit: Dezember 2021
Nähere Infos: hier
Masterarbeit bei BEST/KWB
Typ: Masterarbeit
Thema: Prototypenentwicklung einer emissionsarmen Biomassefeuerung
Ziel ist es, die Staub- und NOx-Emissionen der Biomassefeuerung über alle Lastbereiche im Vergleich zu den aktuellen Produkten wesentlich zu verbessern. Die Arbeit umfasst die Mitarbeit bei der Planung und Konstruktion der Versuchsanlage, sowie die Durchführung und Auswertung der Messkampagnen zur Bewertung der Technologie. Parallel dazu werden bei BEST begleitende CFD Simulationen durchgeführt, welche mit den erfassten Messdaten der Versuchsanlage zu vergleichen sind.
Beginn: 01.01.2022
Dauer: 6 Monate
Ausgeschrieben seit: Dezember 2021
Nähere Infos: hier
Masterarbeit am Polymer Competence Center Leoben (PCCL)
Typ: Bezahlte Masterarbeit am Polymer Competence Center Leoben (PCCL)
Thema: Development of magnetic nanoparticles and implementation in photo-curable resins
Beginn: 01.12.2021
Dauer: 6 Monate
Ausgeschrieben seit: November 2021
Nähere Infos: hier
Masterarbeiten in der Arbeitsgruppe Oliver Kappe, KFU Graz
Typ: Bezahlte Masterarbeit
Thema: Electroorganic Synthesis
Ausgeschrieben seit: November 2021
Nähere Infos: hier
Typ: Bezahlte Masterarbeit
Thema: Flow Chemistry and Machine Learning
Ausgeschrieben seit: November 2021
Nähere Infos: hier
Typ: Bezahlte Masterarbeit
Thema: Flow Photochemistry
Ausgeschrieben seit: November 2021
Nähere Infos: hier
Bachelor- und Masterarbeiten am Institute of Biobased Products and Paper Technology, TU Graz
Typ: Bezahlte Masterarbeit am Institute of Biobased Products and Paper Technology
Thema: Full oxidation or partial oxidation of white liquor in pulp oxygen delignification
Dauer: 6 Monate
Ausgeschrieben seit: Oktober 2021
Nähere Infos: hier
Typ: Bezahlte Masterarbeit am Institute of Biobased Products and Paper Technology
Thema: Influence of nanobubble dosage on the oxidation of white liquor
Dauer: 6 Monate
Ausgeschrieben seit: Oktober 2021
Nähere Infos: hier
Typ: Bachelorarbeit bei Mondi
Thema: Sustainable biomodification of fibers
Dauer: 6 Monate
Ausgeschrieben seit: Oktober 2021
Nähere Infos: hier
Bachelorarbeit am Institut für Biobasierte Produkte und Papiertechnik
Typ: Bachelorarbeit am Institut für Biobasierte Produkte und Papiertechnik
Thema: Analyse und Anwendung von wertvollen Substanzen aus Baumwolle
Beginn: So bald wie möglich
Dauer: Ca. 1 Monat
Ausgeschrieben seit: September 2021
Nähere Infos: hier
Masterarbeit am Institut of Bioproducts and Paper Technology (BPTI)
Typ: Masterarbeit am Institut of Bioproducts and Paper Technology (BPTI)
Thema: Characterisation of technical biopolymers for surface applications (rheological, physical and chemical)
Beginn: September 2021
Ausgeschrieben seit: Juni 2021
Nähere Infos: hier
Masterarbeit am Institut of Chemical Engineering and Environmental Technology
Typ: Masterarbeit am Institut of Chemical Engineering and Environmental Technology, TU Graz
Thema: Theoretical and Experimental Evaluation of Metal Hydrides for Hydrogen Storage
Beginn: September 2021
Ausgeschrieben seit: Juni 2021
Nähere Infos: hier
Masterarbeit am Research Center for Pharmaceutical Engineering (RCPE)
Typ: Masterarbeit am Research Center for Pharmaceutical Engineering (RCPE)
Thema: Investigation of industrial relevant syntheses in a continuous reaction calorimeter
Beginn: Juli
Ausgeschrieben seit: Juni 2021
Nähere Infos: hier
Masterarbeit am Polymer Competence Center Leoben GmbH (PCCL)
Typ: Masterarbeit am Polymer Competence Center Leoben (PCCL)
Thema: Development of electrically conductive and photo-curable resins
Beginn: Sofort
Dauer: 4 Monate (20 h/Woche)
Ausgeschrieben seit: Juni 2021
Nähere Infos: hier
Masterarbeit am Institute of Analytical Chemistry and Food Chemistry (ACFC)
Typ: Masterarbeit
Thema: Characterization of mineral oil aromatic hydrocarbon fractions using LC pre-separation and GC×GC-ToF-MS
The aim of this master thesis is to use normal-phase liquid chromatography to separate the mineral oil aromatic hydrocarbons (MOAH) from a crude oil into sub-fractions according to their ring numbers. Afterwards, this subfractions shall on the one hand be characterised by using GC×GC-ToF-MS, on the other hand their genotoxicity shall be determined by using the AMES test.
Ausgeschrieben seit: Juni 2021
Ausgeschrieben von: Prof. Erich Leitner
Nähere Infos: hier
Masterarbeit am Institut für Biobasierte Produkte und Papiertechnik
Typ: Masterarbeit
Thema: Renewable active materials for organic redox flow batteries
The aim of the thesis is to investigate the up‒scaling of the active material synthesis (batch and continuous) as well as the chemical stability of the products. It combines aspects of chemistry and chemical engineering.
Beginn: Sofort
Ausgeschrieben seit: Mai 2021
Ausgeschrieben von: Georg Rudelstorfer, Werner Schlemmer, Prof. Stefan Spirk
Nähere Infos: hier
Masterarbeit am Institute of Bioproducts and Paper Technology
Typ: Masterarbeit
Thema: Influence of nanobubble dosage on the oxidation of white liquor
Purpose of the study is to investigate possible improvements on the process of white liquor (WL) oxidation by using nanobubble dosage.
Beginn: Sommer 2021
Dauer: 6 Monate
Ausgeschrieben seit: Mai 2021
Ausgeschrieben von: Dr. Rene Eckhart, Prof. Ulrich Hirn
Nähere Infos: hier
Masterarbeit am Institute of Bioproducts and Paper Technology
Typ: Masterarbeit
Thema: Full oxidation or partial oxidation of white liquor in pulp oxygen delignification
Purpose of the study is to investigate the process of white liquor (WL) oxidation to reduce a consumption of sodium hydroxide (NaOH) in the oxygen delignification (OD) stage.
Beginn: Sommer 2021
Ausgeschrieben seit: Mai 2021
Ausgeschrieben von: Roman Poschner, Prof. Ulrich Hirn
Nähere Infos: hier
Masterarbeit am Institute für Biobasierte Produkte und Papiertechnik
Typ: Masterarbeit
Thema: Oxidation of volatile organic compounds in pulp and its influence on paper strength
Ausgeschrieben seit: Mai 2021
Ausgeschrieben von: Dr. Jussi Lahti, Prof. Ulrich Hirn
Nähere Infos: hier
Masterarbeit am Institut für Chemische Verfahrenstechnik und Umwelttechnik (TU Graz)
Typ: Masterarbeit
Thema: Development and Characterization of Graphene Oxide Supported Catalysts for the Alkaline Direct Ethanol Fuel Cell
Ausgeschrieben seit: April 2021
Ausgeschrieben von: DI Sigrid Wolf, Prof. Viktor Hacker
Nähere Infos: hier
Masterarbeit/Praktikum am Polymer Competence Center Leoben
Typ: Masterarbeit/Praktikum
Thema: Development of polyurethane-based dynamic covalent networks
Ausgeschrieben seit: Februar 2021
Ausgeschrieben von: PCCL - Polymer Competence Center Leoben
Nähere Infos: hier
Masterarbeit am Institut für Chemische Technologien von Materialien (TU Graz)
Typ: Masterarbeit
Thema: Lithium-Ion Capacitors
Ausgeschrieben seit: November 2020
Ausgeschrieben von: Priv.-Doz. Dr. Daniel Rettenwander, Dr. habil. Qamar Abbas
Nähere Infos: hier
Bachelorarbeit am Institut für Biobasierte Produkte und Papiertechnik (TU Graz)
Typ: Bachelorarbeit
Thema: Retention of Cationic Starch in Papermaking
Ausgeschrieben seit: Oktober 2020
Ausgeschrieben von: Dr. Jussi Lahti, DI Roman Poschner
Nähere Infos: hier
Masterarbeit bei AGRANA Research & Innovation Center (Tulln a. d. Donau, NÖ)
Typ: Bezahlte Masterarbeit
Thema: Aromenidentifikation und -quantifizierung in prozesstierten Fruchtsorten mit GC-IMS
Ausgeschrieben seit: September 2020
Ausgeschrieben von: Prof. Barbara Siegmund, Dr. Anatol Schmidt (ARIC)
Nähere Infos: hier
Masterarbeiten am Institut für Chemische Verfahrenstechnik und Umwelttechnik (TU Graz)
Typ: Masterarbeiten
Thema: Development and Characterization of Novel Synthesis Methods for Hydrogen Production with Metal-Oxide Oxygen Carriers / Characterization of Material Synthesis for Oxygen Uncoupling from Metal-Oxides
Ausgeschrieben seit: Mai 2020
Ausgeschrieben von: DI Michael Lammer
Nähere Infos: Thema 1 / Thema 2
Masterarbeit am Institut für Biobasierte Produkte und Papiertechnik (TU Graz, Kooperation mit Nestlé)
Typ: Bezahlte Masterarbeit
Thema: Materialentwicklung
Ausgeschrieben seit: März 2020
Ausgeschrieben von: Dr. Samir Kopacic, Prof. Ulrich Hirn
Nähere Infos: hier
Masterarbeit am Institut für Chemie (AG Medizinische Chemie, Uni Graz)
Typ: Bezahlte Masterarbeit
Thema: Entwicklung von neuen, verbesserten und effizienten Photo-Liganden, die Lichtsteuerung von biochemischen Prozessen in lebendigen Zellen ermöglichen
Ausgeschrieben seit: Februar 2020
Ausgeschrieben von: Prof. Toma Glasnov
Nähere Infos: hier
Masterarbeit am Institut für Chemische Technologie von Materialien (TU Graz)
Typ: Masterarbeit
Thema: Ceramics Meet Polymers – Membranes for Flexible Solid-State Li-Ion Batteries
Ausgeschrieben seit: Januar 2020
Ausgeschrieben von: Dr. Daniel Rettenwander, Prof. Christian Slugovc, Prof. Gregor Trimmel
Nähere Infos: hier